Category Archives: Frazer Family News

Gingerbread houses!

Most Decembers don’t go by without our annual gingerbread house decorating “party.” It is an event enjoyed by all ages! I think the pictures tell the story…

And if parents “want” help making theirs, they can usually find eager volunteers!

Thank you, Jonathan, for all the work you did to make this special day!

End of November Update

Before I have to flip my calendar page to December, I’ll take a few moments to give a “before the Christmas rush” update. Since our trip to New Brunswick at the beginning of September much has taken place, though a lot of the activity doesn’t get caught on camera.

There was a family trip to the Village d’Antan. Taking a step back into the past was fun and interesting.

Evelyn and I continue helping a friend with her horses. I had the joy of seeing the horse I helped to train go to a good home.

More bunnies were born and some are now sold.

The lambs are looking more like sheep than lambs now.

Now who is the hunter?

The kittens are growing up too.

Will someone give me a good home, please?

Evelyn has started hand quilting her quilt. I’m almost to that step on mine.

Daddy and Mommy took a couple hikes, including the difficult Mount Katahdin. It was foggy the day they hiked, but the following day revealed a beautiful outlook on the mountain.

And at last, after years of hiking in the White Mountains, they sighted not one, not two, but three moose!

In October, we took Nana (Mommy’s mother) out for her 90th birthday.

The cousins have been over to visit multiple times.

Since the family keeps growing new family photos were in order!

Sometimes the candid shots are the most fun.

Stephen didn’t know what he was getting into when he invited Elizabeth and Keziah onto his back…

Perhaps he should start a new pushup challenge for 2018!

Mid-November saw us heading down to the VA FEW conference. Yes, it snowed on route, but there was no snow in VA. It was a incredible time of Christian fellowship and refreshment in the Lord.

With December around the corner, the “Christmas rush” has actually already begun with a few cookies made and frozen and the FFF&F written, printed, and getting ready for the mail! We look forward to what the Lord has in store for us in the next month!

Family Vacation! (part 2)

Given that we took our trip to Fundy during the off season, many of the beaches were deserted. This was wonderful for us and we enjoyed roaming all over, drinking in the beauty of God’s creation. Of course, we were always careful to keep one eye on the tide…

One of our stops was Cape Enrage. Here a lighthouse and fog horn warn ships of dangerous rocks in bad weather.

A narrow staircase leads down to a rocky cove.

Amy learning about tides.

Nearby, a “marshwiggle habitat” drew our attention. I believe these are what are called “salt marshes.”

Mary’s Point was another very quiet beach, but this one was sandy instead of rocky. We got to be here at both low tide and just after high tide. The land slopes so slowly in this location that the tide runs kilometres out. One would have to run to keep ahead of it as it came in! 

Hmm… interesting driftwood! Amazingly it still works. I guess they make Nikons well! 🙂

We also made a trip out to Moncton to see the reversing tide. The river in this place actually reverses directions as the tide comes in!

Another spot of interest was Anderson Hollow Lighthouse. Actually not a functional lighthouse, this tiny replica and corresponding boat were built in honour of those who served as lighthouse keepers over the years.

Our final stop before leaving New Brunswick was a receded cove in a quiet spot: Herring Cove. It was beautiful here. Perhaps it was just the before-a-storm lighting and the hazy, almost fog combined with seaweed covered rocks backed by soaring cliffs, but something made it feel a bit “fjord-like.” It made me think a little of the pictures I’ve seen of Scandinavian ocean sides.

And what would a vacation from the perspective of a family of photographers be without a few pictures of photographers? 🙂

Did I mention that it was windy?!

It was a wonderful family vacation! The only improvement for next time would be to have Stephen with us!

Family Vacation!

Though our family travels a bit, most of the time we go places in order to attend a conference, to spend time with another family, or simply take a day hike. It has been 11 years since we took off for more than a day to see a new place and enjoy God’s creation just as a family. September 4th to 7th was such a time for us. Sadly, Stephen’s classes at the university started up that week, so he wasn’t able to be with us. Hopefully we’ll be able to work around that next time.

Monday morning, we took off. It was a long drive…

…but eventually we began to see signs of what we were coming to see:

Finally, we arrived at our destination:

We camped at Wolfe’s Point campground where we rented an oTentik – like a permanent tent. We were glad to have them as during our last night there, it rained hard. Taking down our tents in the rain would not have been fun.

But on the whole, we actually received very little rain during our trip. Despite dire predictions of heavy thunderstorms, the only showers came either during the night or while we were driving in the van – never while we were walking beaches or exploring coves.

Of course, one of the first things we wanted to do upon arriving was to go down to the rocky cove and see tide come in.

The Bay of Fundy is well known for experiencing the world’s highest tides. Knowing that in one’s head and seeing it with one’s eyes are two radically different things. In 2006, during our trip out to the west coast, we had the fun of lighting a campfire on the sand and of watching the tide slowly come in to wash it away. But the tide in the Bay of Fundy is nothing like that slow-moving, gentle, western Vancouver Island tide. Here the tide rises and falls as much as 30 feet every 12 hours! We had to be careful always to keep an open escape route behind us as we backed away from the incoming tide! All camera equipment had to remain tied to our backs or in our hands, for in a matter of minutes the water could come in and wash any forgotten tripod, etc. away.

During our two day stay, we had opportunity to visit numerous beaches, coves, and the famous Hopewell Rocks. These last are situated in the spot where the tides climax. Though we were there neither quite at high tide nor quite at low tide, the pictures show the dramatic flow and ebb of the tide. The sheer rock cliffs make you realise how dangerous it would be to get stuck here at high tide! We were careful to time our visit as the tide was going out, not coming in.

Looks like something washed ashore!

The Hopewell Rocks were by far the most crowded place we visited, but even there it was not impossible to get pictures that didn’t contain tourists. And there were birds everywhere we went. Some of them, we recognised from pictures, but had never seen in the wild.

These ones weren’t actually wild.

And other wildlife…

And not so wild life…Though we took some interesting, very small roads…

… and saw moose dropping all over one road, this was the only moose we saw:

But to tell of all of our stops would make this post very long, so I’ll pause here and post more pictures later.

Calves

As mentioned it a previous post, our cow calved at the end of August. However, unlike other years, we haven’t posted any pictures. That is because the calf didn’t survive the birth process. It was a malpresentation: tail first! We had to help Hershey out by turning the calf around and pulling it out back feet first. By the time we accomplished that, however, the calf was dead. 🙁

Nevertheless, we do have a calf. Actually, we bought two: a Jersey and a Jersey/Holstein. Toblerone (named for the triangle shaped marking on his face) has always been a very lively calf.

But he’s practising posing!

Roast Beef, on the other hand was never quite so active, though he did try out the wading pool.

Though at first it looked like he might pick up and do well, we were mistaken and he died too. So we’re left with just Toblerone who makes up for the two lost calves with all his energy!

A busy summer

What a summer it has been! The kitchen renovations were done just in time to get going on another busy time: preparing for the first Quebec FEW conference! Several projects around the house needed to be done, such as putting in a drain…

… and installing a new (pressure sensitive! 🙂 ) shower head upstairs.

And there were a few non-FEW related events… Daddy and Mommy got out hiking a couple times.

Of course the kids were over several times. They are such a joy!

We washed some of our sheep’s wool and halter broke our young ram.

Then began the real planning. There was a lot of discussion on how to work everything…

…and phone calls…

…and lists…

…and more discussion!

And things came together. The linens and towels emerged from cupboards and were washed.

As the final countdown began, boxes were filled and carefully labelled. The sound system was taken apart and made ready to travel to Grace Village where the conference was to be held. All the equipment for simultaneous translation was organised and ready to go. Temporarily the house looked a terrific mess!

But the place soon looked better as beds were made and the trailer was loaded. The office turned into a makeshift hotel suite and even the pantry turned into a “bedroom.”

Hard to believe the above photo is usually the boys room! 🙂

The big day finally came and the FEW team arrived!

We enjoyed joining them in song.

And since the cow went and calved that same day, several got to try their hand at milking!

The conference was a tremendous success. So many people expressed how encouraged they were through the sessions, through talking one-on-one, through interactions during the children’s hour…

As a family, we were really blessed. Hosting a FEW conference made for a very busy summer, but it was well worth it! We praise the Lord for the FEW team’s willingness to travel all the way up to Quebec. Thank you,FEW Team!

Every thing beautiful

Once upon a time, in a land far, far, away – actually, Germany – there was a sleek, shiny, stainless steel dishwasher.  This was a special dishwasher – he had not one, not two, but three racks for washing dishes.  And he just knew that he was made to wash dishes.  One day, as he was sitting in the warehouse waiting for someone to come in and buy him, he was pondering his life purpose.

“I just know I’m made to wash dishes,” he thought.  “My beautiful water sprayers, my perfect hoses, my sleek and fancy dishwashing racks – yes, everything about me says that I was made to wash dishes.  My hope – my dream, my only desire in life is to wash dishes.  But here I sit on a shelf, totally unused and apparently unwanted.  What is my maker thinking?  Why did he fit out me so perfectly to wash dishes then leave me on the shelf like this?”

“Patience,” a voice answered him.  He hadn’t realised that he was thinking out loud.  “Patience,” it said again, and this time he recognized the voice of Aldert, an older dishwasher sitting on the shelf in front of him.

“Every dishwasher is sold sometime,” Aldert continued.  “The master dishwasher builder does not make a dishwasher to no purpose.  He always puts them to his purposes in his time.  But if you are to find the perfect fit with the perfect people for you, you must be patient.  Who knows, you may be taken to a home where you will wash more dishes than any of us – but you must be patient.”

Watler sighed.  He believed it was true, since almost all the dishwashers who had been there before he was were gone, and even some of the ones that had come in after him.  He sat back and waited.

Then one day, I heard strange voices talking.  They were talking in German, but here is a rough translation of what they said:

“I think it’s the dishwasher on shelf A52,” the first voice said.

“Why are we supposed to ship a single dishwasher off to North America?  Usually we ship in bulk from the warehouse down south, don’t we?”

“Yes, but they ran out of this model in North America, and someone ordered one, so rather than waiting for the whole shipment, we’re sending one solo.”

The voices were growing louder, and suddenly two men appeared in front of Watler.  They glanced him up and down, checked model numbers and other worthless jargon, and finally inspected his fine stainless steel front, and checked that his beautiful racks were all in place.  Then they packaged him up, and loaded him on a truck.

“Hooray!” thought Watler.  “I’m finally going!  I wonder if I’ll be at my home tomorrow.  I was made to wash dishes, I just know it.  And finally, finally, finally!  I’m going!  I’ll be washing dishes soon!”  A tear of joy escaped from one of his pipes.

For the rest of the day, Watler was excited.  He was at last going to the home where he could wash dishes!  He just knew that the master builder had meant for him to wash dishes – he could feel it in his buttons.  But imagine his disappointment when the truck stopped, dropped him off in another warehouse, and left him there for not one, not two, but three days!

At the end of the third day, Watler’s pipes were boiling.  He was made to wash dishes, and someone who didn’t know better had left him in the warehouse as though he had been nothing but a sink or garbage can.  Suddenly, though, the words of Aldert came to his mind:

“The master dishwasher builder does not make a dishwasher to no purpose.  He always puts them to his purposes in his time.”

Then, when he thought things couldn’t get worse, they did.  Someone came and picked him up, and started bringing him toward the ocean.  Then he descended into a dark, stuffy hole, and was dumped next to a supercomputer on one side, with a server rack on the other side.  What boring companions! But in this dismal hole, packed beside worthless junk that was made to do nothing but process bytes that you couldn’t taste and bits that wouldn’t wash off, Watler truly learned the secret of contentment.  He learned to trust that the master builder truly did have a plan for him, and that in his perfect time, everything would come together as it ought.

To tell Watler’s whole story would take far too long, because even after that long voyage across the Atlantic Ocean, there were more lessons in patience.  But probably the most trying lesson in patience came the day that Watler was sitting in the living room of the house of the person who had bought him.

“At last!” he thought, nearly crying he was so happy.  “At last, the waiting is over!  At last, I’ve arrived!  And look at those stacks of dishes!” he gloated.  But instead of putting him to work, the family simply unpackaged him, flipped him on his back, and left him sitting there helpless for a whole day.  If he hadn’t learned patience yet, he would have been fuming again, but instead, he thought,

“I’m made to wash dishes.  And I know that at the right time, in the right way, the master planner will make everything right.”

Finally, he was installed.  The installers weren’t very experienced, and it took them nearly a day, but Watler didn’t mind.  He was being installed in a brand new kitchen with lots of dishes around.  Finally, he was being loaded.  And at long last, he was started.  But once again, tragedy struck.  Only half way through his cycle, suddenly, he was brought to a screeching halt.  Someone had pushed his power button!  For half an instant, he wondered if it was all a big mistake, but then he remember the words of Aldert – “…you must be patient.”

After a few hours, he was started up again (of course, he remembered where he was in the process), and was allowed to finish his first batch of dishes in peace.  He went to sleep that night a very happy and fulfilled dishwasher – with many dishes promised to be coming his way.  As he dropped off, he thought,

“So this is why!  The master dishwasher maker sent me to this home, knowing that I was specially outfitted to wash lots of dishes.   Truly, his plans are best!”

Happy dishwasher

A happy dishwasher

 


Now let me telll you part of this story from another perspective…

How many of you guys like plumbing?  I mean, really like plumbing?  I must confess, I’m one of those happy individuals for whom the sight of water pouring out of the top of a drain pipe isn’t a terror which brings to mind dark imaginations of hours of fighting with filthy tools down dark holes.  That being said… it’s still not my absolute favourite thing to spend my evenings on.  However, when it comes to installing a dishwasher on plumbing that has been out of service for some 6-7 years, sometimes you have no choice…

It all started around 6-7 years ago, when our dishwasher broke down.  Our serviceman declared it irreparable, and thus it stood, unused – except for a variety of unconventional usages, such as storing dishtowels, hiding anniversary gifts, pulling parts off of, and even hiding the dishes once to make them look like they were already done.  (Believe it or not, this was actually a good faith joke, not naughtiness.)

Whatever the case, when we came to do the kitchen renovation which the faithful reader has already ascertained that we were recently doing, one of the items on our agenda was to replace the dishwasher.  Now, you have to understand that I hate dishwashers.  Or rather, I love washing dishes. But even I had to admit that this dishwasher, if nothing else, looked nice – because I also happen to like the looks of stainless steel kitchen appliances.

Bringing the dishwasher over

Bringing it over

So at it went we!  We had left a hole so that it could simply slip into the “peninsula” (an outlying section of counter attached to the rest only by one end) once the plumbing was connected.  We hooked up the plumbing and wiring with no major issues, et voilà!  It was ready to roll. Or… so we thought.

We turned it on, and nothing was leaking, so my father started attaching the back panel, and I attached the front panel.  We marveled at the silence of this silver coloured monster which was steam blasting our dishes.  All was well until it came to its first drain cycle.  Suddenly, someone noted an unprecedented aquatic accumulation in front and to the side of the silver monster.  A quick job with a screw driver sufficed to remove the front panel, revealing water under the whole dishwasher. My father was equally busy moving out the back panel, revealing water underneath at the back as well.

We quickly deciphered from various telling signs that this water came not from the pure source of our well, but rather from the drain.  We conjectured that it was probably spilling out the top of the drain pipe, since there appeared to be traces of water pouring down its sides.  A minute’s worth of patience was sufficient to confirm the hypothesis: when the dishwasher commenced its next drain cycle, water instantly spewed from the drain pipe at a prodigious rate.

Being the geniuses we are, of course, we turned off the dishwasher.  For those who still wonder at this step, please consider that though our kitchen was well sealed, it was not intended to be a fish pond – especially not with the remains of everyones’ suppers floating around in it.  The whirring silver monster made no complaint concerning its unfortunate halt, patiently waiting for us to resolve the issues and allow it to resume its happy occupation of cleansing the dishes.

The first thing to do at this point was relatively clear: clean the P-trap.  Happily, there was a cleanout valve at the end of drain pipe.  I quickly opened it, not sure what to expect, and narrowly missed getting hit in the face with a stream of a thick black soupy liquid.  Unfortunately, the freezer, floor, walls, bookshelf, garbage can, and desk underneath were not so blessed.  (Neither were my hands, for the record.)

Those who read my previous plumbing post may remember our famous snake.  It was the tool for the moment.  It quickly showed us that the pipe was blocked for about 15-20 feet with what I call “6 years of accumulation of 3 trillion bacteria, sitting down there laughing at us.”

Dirty floor

Actually, this is after the first cleanup. It was worse than this.

Several hours, several handwashings, and several discussions as to how to clean out the pipe later, we finally managed to get it unblocked enough that my father could send down some baking soda solution, followed with a heavy dose of vinegar – which effectively cleaned out the pipe, and allowed us to resume the dishwasher’s cycle.

More cleaning

Treating with baking soda and vinegar


“He hath made every thing beautiful in his time: also he hath set the world in their heart, so that no man can find out the work that God maketh from the beginning to the end.  I know that there is no good in them, but for a man to rejoice, and to do good in his life.  And also that every man should eat and drink, and enjoy the good of all his labour, it is the gift of God. I know that, whatsoever God doeth, it shall be for ever: nothing can be put to it, nor any thing taken from it: and God doeth it, that men should fear before him.” (Ecclesiastes 3:11-14)

It was striking me as I thought over Watler’s plight that it is actually not unsimilar to the plight that many of us find ourselves in from day to day. We just know that God wants a particular thing for our lives.  We know that He has designed us for a given purpose.  That purpose may be marriage, a family, a ministry, or a thousand different things.  We look at our hearts, we look at our skills, we look at who God has made us, and we wonder, just like Watler,

“My hope – my dream, my only desire in life is [xyz].  But here I sit on a shelf, totally unused and apparently unwanted.  What is my Maker thinking?  Why did He fit out me so perfectly to [xyz] then leave me on the shelf like this?”

Aldert’s exhortation actually rings true for me.

“The Master does not make a person to no purpose.  He always puts them to His purposes in His time.  But if you are to find the perfect fit with the perfect place for you, you must be patient.”